How To Use Dent Puller

Auto Dent Pullers: Do DIY Dent Removal Kits Work?

Little dents in your machine are frustrating. Sometimes, a ding in a car park tin can cause noticeable damage to the bodywork. Many car owners are turning to car dent pullers to try and repair the damage themselves.

Dent removal kits (or dent repair kits) pull dents from the outside of the car, unlike Paintless Dent Removal techniques, which push dents out from the inside. Machine dent pullers are widely bachelor and inexpensive to purchase, but do they work?

Before you endeavor a DIY dent removal, read our advice on the types of car paring pullers available and when to choose a professional dent repair service.

What is a Car Dent Puller?

Car paring pullers lift dents out of car bodywork and straighten the metal out. In that location are two main types of pullers: suction and mucilage kits.

Suction dent pullers work like plungers, you attach it to the dent and pull it up towards you to remove the dent.

Glue dent puller kits involve gluing a apartment pulling tab direct onto the dent. The pulling tab has a screw function, and so you twist the handle to pull the tab up and abroad from the car.

Other kits attach the pulling tab to a pole. Then you slide a weight forth the pole, similar a wheel pump, to provide the upward force per unit area.

Delight annotation: We exercise not advise you lot to use whatever dent puller kit that requires yous to drill holes into the dent.

Do they work?

Dent pullers only work on shallow dents that are positioned on a flat, flexible surface. They can better the appearance of motorcar dents but are unlikely to create a perfect terminate. Unfortunately, DIY dent pullers will non work on deep, athwart dents or damage along the edges of bodywork. Dents in areas of thick metal are very difficult to remove at home.

Pros of Dent Pullers

DIY dent pulling kits can salvage money in the short term.
You lot don't have to be without your car while it is repaired.
You can control your own repair.

Cons of Dent Pullers

Using a DIY minor dent puller is very time consuming, especially if you have no previous experience.
You lot cannot achieve a perfect professional finish with a DIY dent pulling kit.
It is very like shooting fish in a barrel to make the damage worse, which would and so crave a more expensive repair.
You cannot use a paring puller on an surface area that also has paintwork damage, as this will worsen the damage.

How to use a Machine Paring Puller

It is of import to follow the instructions that come with your dent puller kit. Keep in mind that some auto dents may take several attempts to pull the damage out.

The start step is to clean the surface of the motorcar thoroughly – this will remove any clay and grease.

Then thoroughly dry the damaged surface area as this will help the dent puller stick to the metal.

Suction Dent Pullers

Suction Dent Puller

Moisten the suction surface with a small amount of water and attach information technology the puller to the automobile.
For pocket-sized dents, adhere the puller to the centre of the dent.
For big dents, begin pulling at the edges and work your way towards the middle.
Once the puller is tightly fastened to the car, begin pulling it straight up towards your body.
Use small, quick pulses rather than 1 big tug.

Glue Paring Pullers

Glue Dent Puller

Choose the pulling tab that best suits the size of the paring.
Heat up the glue gun and apply a blob to the lesser of the pulling tab.
Prepare the tab to the dent, but be careful non to press also hard. There should be a layer of glue between the tab and the metal.
Allow the glue to set for several minutes or until hard.
Attach the pulling mechanism over the pulling tab and begin pulling the tab away from the car. Be sure to use curt, quick movements.
If the tab pops off before the dent is removed, remove the gum with the substance provided, and start the process again.
If you pull the paring too far, y'all may create raised areas. You tin apply a rubber mallet to gently tap them back downwards.

Risks and Advice

Dent pullers have limited use and are not suitable for removing nigh types of car dents. Removing whatsoever car dent is a lengthy multi-step process which requires experience. If you move besides quickly or pull as well hard, the metal could stretch and will require a more all-encompassing professional repair. For large dents with paintwork damage, always take your motorcar to a professional.

Minor Dent Repair and Removal Service

At ChipsAway, our specialists offer a dent removal service which tin rectify almost minor dents. From a bumper dent to small-scale dent in the side panel, nosotros can repair the damage in no time. We are experts in car dent repairs, so it'due south our job to become your car back to fantastic condition stress-free. Dissimilar a DIY paring pulling kit, all ChipsAway repairs come with a Lifetime Repair Guarantee.

Call us on 0800 145 5118, or complete our online class for your gratis dent repair estimate.

Get your FREE Guess!